 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Cat.No.R44E-13 !Note * This PDF catalog is downloaded and !CAUTION (for storage, operating, rating,ltd. Therefore, it's specifications are subject to change or oursmoking and/or burning, etc. !Note * Please read rating from the website of Murata Manufacturing co., soldering, mounting and handling) in this catalog to prevent products in it may be discontinued without advance notice. Please check with our sales representatives or product engineersspecifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This catalog has only typical before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 CONTENTS Part Numbering Basic Characteristics 1 2 3 4 Temperature Sensor and Compensation 0201 (0603) Size Temperature Sensor and Compensation 0402 (1005) Size Temperature Sensor and Compensation 0603 (1608) Size Temperature Sensor and Compensation 0805 (2012) Size 2 6 7 8 10 12 13 14 18 22 25 26 28 29 31 32 34 35 37 41 43 1 2 3 Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Temp. Sensor and Compensation Chip Type !Caution/Notice Temp. Sensor and Compensation Chip Type Package 5 Temperature Sensor Thermo String Type Temperature Sensor Thermo String Type Specifications and Test Methods 4 5 6 7 Temperature Sensor Lead Type Temperature Sensor Lead Insulation Type Temperature Sensor Temperature Characteristics (Center Value) Temperature Sensor Thermo String Type/Lead Type !Caution/Notice Temperature Sensor Thermo String Type/Lead Type Package 8 Inrush Current Suppression Lead Type Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Inrush Current Suppression Lead Type !Caution/Notice Inrush Current Suppression Lead Type Package 6 7 8 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 o Part Numbering NTC Thermistors for Temp. Sensor and Compensation Chip Type (Part Number) qProduct ID Product ID NC wSeries Code P eDimensions (LgW) Code 03 15 18 21 Dimensions (LgW) 0.60g0.30mm 1.00g0.50mm 1.60g0.80mm 2.00g1.25mm EIA 0201 0402 0603 0805 yResistance Tolerance Code D E F J rTemperature Characteristics Code WB WD WF WL WM XC XF XH XM XQ XV XW Temperature Characteristics Nominal B-Constant 4050e4099K Nominal B-Constant 4150e4199K Nominal B-Constant 4250e4299K Nominal B-Constant 4450e4499K Nominal B-Constant 4500e4549K Nominal B-Constant 3100e3149K Nominal B-Constant 3250e3299K Nominal B-Constant 3350e3399K Nominal B-Constant 3500e3549K Nominal B-Constant 3650e3699K Nominal B-Constant 3900e3949K Nominal B-Constant 3950e3999K iPackaging Code RA RB RC RL Packaging Plastic Taping 4mm Pitch Paper Taping 4mm Pitch Paper Taping 2mm Pitch (10000 pcs.) Paper Taping 2mm Pitch (15000 pcs.) uIndividual Specifications Structures and others are expressed by two figures. Ex. Code 03 Individual Specifications Standard Type Resistance Tolerance 0.5% 3% 1% 5% Series Plated Termination Series NTC Thermistors Chip Type NC q P 18 XH r 103 t J 03 RB i tResistance Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance 102 103 104 1k 10k 100k we yu 2 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistor for Temperature Sensor Thermo String Type (Part Number) qProduct ID Product ID NXF NTC Thermistors Sensor Thermo String Type NXF q T w 15 e XH r 103 t F A 2 B 025 !0 uLead Wire Type Code A Lead Wire Type o0.3 Copper Lead Wire with Polyurethane Coat yuio wIndividual Specifications Code T eChip Dimensions Code 15 Dimensions (LxT) 1.00 x 0.50mm EIA 0402 Individual Specifications Commercial Type iShape of the Lead Wire Kink Code 1 2 oPackaging Code B Packaging Bulk Shape of the Lead Wire Kink The Twist of Lead Wire Type Standard Type rTemperature Characteristics Code WB WF XH tResistance Expressed by three figures. The unit is (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code 103 473 104 yResistance Tolerance Code F Resistance Tolerance 1% Resistance 10k 47k 100k Temperature Characteristics Nominal B-Constant 4050-4099K Nominal B-Constant 4250-4299K Nominal B-Constant 3350-3399K !0Dimensions (Full Length) Code 025 030 040 050 060 070 080 090 100 110 120 130 140 150 Dimensions (Full Length) 25mm 30mm 40mm 50mm 60mm 70mm 80mm 90mm 100mm 110mm 120mm 130mm 140mm 150mm 3 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors for Temperature Sensor Lead Type (Part Number) qProduct ID Product ID NT wSeries Code SA0 SD0 SD1 Series for Temperature Sensors No Lead-coating Type for Temperature Sensors Lead-coating Type (Total Length 30mm max.) for Temperature Sensors Lead-coating Type (Total Length 30 to 50mm) yIndividual Specifications A lead structure and other specifications are expressed by two-digit alphanumerics. Code E1 N6 PB eTemperature Characteristics Code WB WC WD WF XH XM XR XV rResistance Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance 202 203 2k 20k Temperature Characteristics Nominal B-Constant 4050e4099K Nominal B-Constant 4100e4149K Nominal B-Constant 4150e4199K Nominal B-Constant 4250e4299K Nominal B-Constant 3350e3399K Nominal B-Constant 3500e3549K Nominal B-Constant 3700e3749K Nominal B-Constant 3900e3949K uTotal Length (NTSD1 Series) Code 30 40 50 Total Length 30mm 40mm 50mm uPackaging (NTSA/NTSD0 Series) Code A0 B0 Packaging Ammo Pack Taping Bulk Individual Specifications Standard Bulk (NTSA, NTSD0 Series) Standard Ammo Pack Taping (NTSA Series) Standard Bulk (NTSD1 Series) NTC Thermistors NT q SA0 w XH e 103 r F E1 B0 u tResistance Tolerance Code E F Resistance Tolerance 3% 1% ty 4 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors for Inrush Current Suppression Lead Type (Part Number) qProduct ID Product ID NT wSeries Code PA7 PA9 PAA PAD PAJ PAN eResistance Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code 3R0 100 Resistance 3 10 yPackaging Code A0 B0 Packaging Ammo Pack Taping Bulk Inrush Current Suppression Lead Type Series Nominal Body Diameter o7mm o9mm o10mm o13mm o18mm o22mm NTC Thermistors NT q PA7 w 160 e L r BM t B0 y rResistance Tolerance Code L tIndividual Specifications A lead structure and other specifications are expressed by two-digit alphanumerics. Code B1 BM D6 DK DN Individual Specifications Standard Type (Ammo Pack) Standard Type (Bulk) Standard (Bulk) Standard (Bulk) Body Diameter o7mm, o9mm o7mm, o9mm o18mm, o22mm o10mm, o13mm Resistance Tolerance 15% Standard Type (Ammo Pack) o10mm, o13mm 5 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Basic Characteristics !Basic Characteristics 1. Zero-power Resistance of Thermistor: R R=R0 expB (1/T-1/T0) ..............(1) R: Resistance in ambient temperature T (K) (K: absolute temperature) R0: Resistance in ambient temperature T0 (K) B: B-Constant of Thermistor Resistance vs. Temperature 102 Resistance vs. Temperature Characteristics, R/R25 101 2. B-Constant as (1) formula B=Rn (R/R0) / (1/T-1/T0) ............(2) 1 3. Thermal Dissipation Constant When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as follows P=C (T2-T1) ..................(3) C: Thermal dissipation constant (mW/C) Thermal dissipation constant is varied with dimensions, measurement conditions, etc. 10-1 B=3450 B=3900 B=4100 10-2 -20 0 20 40 60 80 100 120 Temperature (C) 4. Thermal Time Constant Period in which Thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (C) to T1 (C). Thermal Time Constant T1 X Temperature 63.2% T0 Time !Performance Item Resistance Condition Measured by zero-power in specified ambient temperature. Calculated between two specified ambient temperatures by next formula. T and T0 is absolute temperature (K). B-Constant B= Rn (R/R0) 1/TY1/T0 Thermal Dissipation Constant Shows necessary electric power that Thermistor's temperature rises 1C by self heating. It is calculated by next formula (mW/C). C= P TYT0 Rated Electric Power Permissive Operating Current Shows the required electric power that causes Thermistor's temperature to rise to a specified temperature by self heating, at ambient temperature of 25 C. It is possible to keep Thermistor's temperature rising max. 1C. Please inquire about test conditions and ratings. 6 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor and Compensation 0201 (0603) Size 1 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.150.05 0.600.03 0.150.05 s Features 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. NCP series are recognized by UL/cUL (UL1434, File No. E137188). 0.300.03 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) s Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25C) (ohm) 11 5% 22 5% 33 5% 47 5% 68 5% 100 5% 1.0k 1.5k 2.2k 3.3k 4.7k 6.8k 10k 1% 10k 1% 10k 10k 15k 22k 33k 47k 47k 68k 68k 100k 1% 100k 100k 150k 220k B-Constant (25-50C) (K) 2750 3% 2750 3% 2750 3% 2750 3% 2750 3% 2750 3% 3500 1% 3500 1% 3500 1% 3500 1% 3500 1% 3380 1% 3380 0.8% 3380 1% 3380 1% 3900 1% 3380 1% 3380 1% 4250 1% 4050 3% 4485 1% 4250 1% 4485 1% 4250 1% 4250 1% 4485 1% 4485 1% 4485 1% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 2758 2758 2758 2758 2758 2758 3539 3539 3539 3539 3539 3428 3428 3428 3428 3930 3428 3428 4303 4101 4537 4303 4537 4303 4303 4537 4537 4537 2758 2758 2758 2758 2758 2758 3545 3545 3545 3545 3545 3434 3434 3434 3434 3934 3434 3434 4311 4108 4543 4311 4543 4311 4311 4543 4543 4543 2758 2758 2758 2758 2758 2758 3560 3560 3560 3560 3560 3455 3455 3455 3455 3944 3455 3455 4334 4131 4557 4334 4557 4334 4334 4557 4557 4557 9.50 6.70 5.50 4.60 3.80 3.10 1.00 0.81 0.67 0.55 0.46 0.38 0.31 0.31 0.31 0.31 0.25 0.21 0.17 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.08 0.06 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Part Number NCP03YS110J05RL NCP03YS220J05RL NCP03YS330J05RL NCP03YS470J05RL NCP03YS680J05RL NCP03YS101J05RL NCP03XM102p05RL NCP03XM152p05RL NCP03XM222p05RL NCP03XM332p05RL NCP03XM472p05RL NCP03XH682p05RL NCP03XH103F25RL NCP03XH103F05RL NCP03XH103p05RL NCP03XV103p05RL NCP03XH153p05RL NCP03XH223p05RL NCP03WF333p05RL NCP03WB473p05RL NCP03WL473p05RL NCP03WF683p05RL NCP03WL683p05RL NCP03WF104F05RL NCP03WF104p05RL NCP03WL104p05RL NCP03WL154p05RL NCP03WL224p05RL p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 0.300.03 7 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size 2 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.250.10 1.00.05 0.250.10 s Features 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). 0.50.05 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) s Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25C) (ohm) 22 33 47 68 100 150 220 330 470 680 1.0k 1.5k 2.2k 3.3k 4.7k 4.7k 6.8k 10k 0.5% 10k 1% 10k 10k 15k 22k 22k 33k B-Constant (25-50C) (K) 3100 3% 3100 3% 3100 3% 3100 3% 3250 3% 3250 3% 3500 3% 3500 3% 3650 2% 3650 3% 3650 2% 3950 3% 3950 3% 3950 3% 3500 2% 3950 3% 3950 3% 3380 0.7% 3380 1% 3380 1% 3900 3% 3950 3% 3950 3% 4485 1% 4050 3% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 3126 3126 3126 3126 3282 3282 3539 3539 3688 3688 3688 3982 3982 3982 3539 3982 3982 3428 3428 3428 3930 3982 3982 4537 4101 3128 3128 3128 3128 3284 3284 3545 3545 3693 3693 3693 3987 3987 3987 3545 3987 3987 3434 3434 3434 3934 3987 3987 4543 4108 3136 3136 3136 3136 3296 3296 3560 3560 3706 3706 3706 3998 3998 3998 3560 3998 3998 3455 3455 3455 3944 3998 3998 4557 4131 6.70 5.50 4.60 3.80 3.10 2.50 2.10 1.70 1.40 1.20 1.00 0.81 0.67 0.55 0.46 0.46 0.38 0.31 0.31 0.31 0.31 0.25 0.21 0.21 0.17 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Part Number NCP15XC220p03RC NCP15XC330p03RC NCP15XC470p03RC NCP15XC680p03RC NCP15XF101p03RC NCP15XF151p03RC NCP15XM221p03RC NCP15XM331p03RC NCP15XQ471p03RC NCP15XQ681p03RC NCP15XQ102p03RC NCP15XW152p03RC NCP15XW222p03RC NCP15XW332p03RC NCP15XM472p03RC NCP15XW472p03RC NCP15XW682p03RC NCP15XH103D03RC NCP15XH103F03RC NCP15XH103p03RC NCP15XV103p03RC NCP15XW153p03RC NCP15XW223p03RC NCP15WL223p03RC NCP15WB333p03RC Continued on the following page. 8 0.50.05 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Continued from the preceding page. Part Number NCP15WL333p03RC NCP15WB473D03RC NCP15WB473F03RC NCP15WB473p03RC NCP15WL473p03RC NCP15WD683p03RC NCP15WL683p03RC NCP15WF104D03RC NCP15WF104F03RC NCP15WF104p03RC NCP15WL104p03RC NCP15WL154p03RC NCP15WM154p03RC NCP15WM224p03RC NCP15WM474p03RC Resistance (25C) (ohm) 33k 47k 0.5% 47k 1% 47k 47k 68k 68k 100k 1% 100k 100k 150k 150k 220k 470k B-Constant (25-50C) (K) 4485 1% 4050 0.5% 4050 1% 4050 1% 4485 1% 4150 3% 4485 1% 4250 1% 4250 1% 4485 1% 4485 1% 4500 3% 4500 3% 4500 3% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 4537 4101 4101 4101 4537 4201 4537 4303 4303 4303 4537 4537 4571 4571 4571 4543 4108 4108 4108 4543 4209 4543 4311 4311 4311 4543 4543 4582 4582 4582 4557 4131 4131 4131 4557 4232 4557 4334 4334 4334 4557 4557 4614 4614 4614 0.17 0.14 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.10 0.08 0.08 0.06 0.04 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 100k 0.5% 4250 0.5% p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 9 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.2-0.6 1.60.15 0.2-0.6 s Features 0.80.15 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) 3 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). s Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25C) (ohm) 100 150 220 330 470 680 1.0k 1.5k 2.2k 3.3k 4.7k 4.7k 6.8k 10k 0.5% 10k 1% 10k 10k 15k 22k 33k 47k 0.5% 47k 1% 47k 68k B-Constant (25-50C) (K) 3250 3% 3250 3% 3500 3% 3500 3% 3650 2% 3650 3% 3650 2% 3950 3% 3950 3% 3950 3% 3500 2% 3950 3% 3950 3% 3380 0.7% 3380 1% 3380 1% 3900 3% 3950 3% 3950 3% 4050 3% 4030 0.5% 4050 1.5% 4050 2% 4150 3% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 3282 3282 3539 3539 3688 3688 3688 3982 3982 3982 3539 3982 3982 3428 3428 3428 3930 3982 3982 4101 4101 4101 4101 4201 4255 3284 3284 3545 3545 3693 3693 3693 3987 3987 3987 3545 3987 3987 3434 3434 3434 3934 3987 3987 4108 4108 4108 4108 4209 4260 3296 3296 3560 3560 3706 3706 3706 3998 3998 3998 3560 3998 3998 3455 3455 3455 3944 3998 3998 4131 4131 4131 4131 4232 4282 3.10 2.50 2.10 1.70 1.40 1.20 1.00 0.81 0.67 0.55 0.46 0.46 0.38 0.31 0.31 0.31 0.31 0.25 0.21 0.17 0.14 0.14 0.14 0.12 0.10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Part Number NCP18XF101p03RB NCP18XF151p03RB NCP18XM221p03RB NCP18XM331p03RB NCP18XQ471p03RB NCP18XQ681p03RB NCP18XQ102p03RB NCP18XW152p03RB NCP18XW222p03RB NCP18XW332p03RB NCP18XM472p03RB NCP18XW472p03RB NCP18XW682p03RB NCP18XH103D03RB NCP18XH103F03RB NCP18XH103p03RB NCP18XV103p03RB NCP18XW153p03RB NCP18XW223p03RB NCP18WB333p03RB NCP18WB473D03RB NCP18WB473F10RB NCP18WB473p03RB NCP18WD683p03RB NCP18WF104D03RB 100k 0.5% 4200 0.5% Continued on the following page. 10 0.80.15 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Continued from the preceding page. Part Number NCP18WF104F12RB NCP18WF104p03RB NCP18WM154p03RB NCP18WM224p03RB NCP18WM474p03RB Resistance (25C) (ohm) 100k 1% 100k 150k 220k 470k B-Constant (25-50C) (K) 4200 1% 4250 2% 4500 3% 4500 3% 4500 3% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 4255 4303 4571 4571 4571 4260 4311 4582 4582 4582 4282 4334 4614 4614 4614 0.10 0.10 0.08 0.06 0.04 100 100 100 100 100 1 1 1 1 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 3 11 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor and Compensation 0805 (2012) Size 1.250.2 0.2-0.7 0.2-0.7 2.00.2 Electrode (Ag System + Ni Plating + Sn Plating) 0.850.15 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. s Features 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). (in mm) 4 s Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25C) (ohm) 220 5% 470 5% 1.0k 5% 2.2k 5% 4.7k 5% 10k 5% 15k 5% 22k 5% 33k 5% 47k 5% 100k 5% B-Constant (25-50C) (K) 3500 3% 3650 3% 3650 3% 3950 3% 3500 3% 3900 3% 3950 3% 3950 3% 4050 3% 4050 3% 4250 3% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 3539 3688 3688 3982 3539 3930 3982 3982 4101 4101 4303 3545 3693 3693 3987 3545 3934 3987 3987 4108 4108 4311 3560 3706 3706 3998 3560 3944 3998 3998 4131 4131 4334 3.00 2.00 1.40 0.90 0.65 0.44 0.36 0.30 0.24 0.20 0.14 200 200 200 200 200 200 200 200 200 200 200 2 2 2 2 2 2 2 2 2 2 2 Part Number NCP21XM221J03RA NCP21XQ471J03RA NCP21XQ102J03RA NCP21XW222J03RA NCP21XM472J03RA NCP21XV103J03RA NCP21XW153J03RA NCP21XW223J03RA NCP21WB333J03RA NCP21WB473J03RA NCP21WF104J03RA Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 12 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions Chip Solder Resist Land c b a Part Number NCP03 NCP15 NCP18 NCP21 Dimensions (mm) Soldering Methods Chip (LxW) a b Reflow Soldering 0.6x0.3 0.25 0.25 Reflow Soldering 1.0x0.5 0.4 0.4-0.5 Flow Soldering 0.6-1.0 0.8-0.9 1.6x0.8 Reflow Soldering 0.6-0.8 0.6-0.7 Flow Soldering 1.0-1.1 0.9-1.0 2.0x1.25 Reflow Soldering 1.0-1.1 0.6-0.7 c 0.3 0.5 0.6-0.8 0.6-0.8 1.0-1.2 1.0-1.2 4 13 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Part Number NCPppYS110 11 Resistance 2750K B-Constant Temp. (C) Resistance () Y40 127.366 Y35 101.662 Y30 81.726 Y25 66.148 Y20 53.946 Y15 44.273 Y10 36.494 Y5 30.262 0 25.226 5 21.150 10 17.828 15 15.103 20 12.859 25 11.000 30 9.452 35 8.162 40 7.077 45 6.161 50 5.389 55 4.731 60 4.168 65 3.687 70 3.273 75 2.915 80 2.605 85 2.335 90 2.100 95 1.894 100 1.713 105 1.554 110 1.412 115 1.287 120 1.176 125 1.077 Part Number NCPppXC680 68 Resistance 3100K B-Constant Temp. (C) Resistance () Y40 1099.815 Y35 846.832 Y30 658.372 Y25 516.007 Y20 407.991 Y15 325.529 Y10 261.707 Y5 212.123 0 173.033 5 141.747 10 116.894 15 97.042 20 81.016 25 68.000 30 57.368 35 48.636 40 41.426 45 35.428 50 30.421 55 26.235 60 22.712 65 19.778 70 17.293 75 15.134 80 13.288 85 11.729 90 10.386 95 9.220 100 8.208 105 7.317 110 6.539 115 5.874 120 5.291 125 4.768 NCPppYS220 22 2750K Resistance () 254.732 203.325 163.452 132.296 107.893 88.546 72.987 60.523 50.451 42.300 35.657 30.205 25.719 22.000 18.904 16.323 14.155 12.323 10.778 9.461 8.336 7.374 6.545 5.830 5.210 4.671 4.201 3.789 3.427 3.107 2.825 2.574 2.352 2.153 NCPppYS101 100 2750K Resistance () 1157.874 924.204 742.963 601.346 490.422 402.482 331.760 275.105 229.324 192.270 162.076 137.296 116.902 100.000 85.927 74.197 64.339 56.013 48.989 43.006 37.891 33.517 29.750 26.498 23.680 21.231 19.094 17.221 15.575 14.124 12.840 11.702 10.690 9.787 NCPppXC220 22 3100K Resistance () 355.823 273.975 213.003 166.943 131.997 105.318 84.670 68.628 55.981 45.859 37.819 31.396 26.211 22.000 18.560 15.735 13.403 11.462 9.842 8.488 7.348 6.399 5.595 4.896 4.299 3.795 3.360 2.983 2.656 2.367 2.116 1.901 1.712 1.543 NCPppXF101 100 3250K Resistance () 1824.175 1390.685 1070.653 831.138 650.960 514.441 409.700 328.877 265.759 215.785 176.395 145.161 120.152 100.000 83.669 70.361 59.456 50.470 43.029 36.830 31.649 27.364 23.756 20.651 18.011 15.800 13.908 12.263 10.844 9.622 8.563 7.648 6.850 6.162 NCPppYS330 33 2750K Resistance () 382.098 304.987 245.178 198.444 161.839 132.819 109.481 90.785 75.677 63.449 53.485 45.308 38.578 33.000 28.356 24.485 21.232 18.484 16.167 14.192 12.504 11.061 9.817 8.744 7.814 7.006 6.301 5.683 5.140 4.661 4.237 3.862 3.528 3.230 NCPppXF151 150 3250K Resistance () 2736.262 2086.028 1605.979 1246.708 976.440 771.661 614.550 493.315 398.639 323.677 264.592 217.742 180.228 150.000 125.503 105.541 89.184 75.705 64.543 55.246 47.473 41.045 35.634 30.976 27.016 23.700 20.862 18.394 16.265 14.434 12.844 11.472 10.275 9.243 NCPppXC330 33 3100K Resistance () 533.734 410.962 319.504 250.415 197.996 157.978 127.005 102.942 83.972 68.789 56.728 47.094 39.317 33.000 27.840 23.603 20.104 17.193 14.763 12.732 11.022 9.598 8.392 7.345 6.448 5.692 5.040 4.474 3.983 3.551 3.173 2.851 2.568 2.314 NCPppYS470 47 2750K Resistance () 544.201 434.376 349.193 282.633 230.498 189.167 155.927 129.299 107.782 90.367 76.176 64.529 54.944 47.000 40.386 34.872 30.239 26.326 23.025 20.213 17.809 15.753 13.982 12.454 11.130 9.979 8.974 8.094 7.320 6.638 6.035 5.500 5.024 4.600 NCPppXC470 47 3100K Resistance () 760.166 585.310 455.051 356.652 281.994 224.998 180.886 146.614 119.596 97.972 80.794 67.073 55.997 47.000 39.651 33.616 28.633 24.487 21.026 18.133 15.698 13.670 11.952 10.461 9.184 8.107 7.179 6.373 5.673 5.057 4.520 4.060 3.657 3.296 NCPppXQ471 470 3650K Resistance () 11822.473 8767.745 6570.224 4971.784 3796.933 2923.400 2269.599 1775.225 1399.050 1110.220 887.257 713.463 577.375 470.000 384.800 316.757 262.177 218.069 182.297 153.150 129.249 109.551 93.281 79.750 68.446 58.996 51.036 44.332 38.640 33.790 29.664 26.123 23.091 20.472 NCPppYS680 68 2750K Resistance () 787.354 628.459 505.215 408.915 333.487 273.688 225.597 187.071 155.940 130.744 110.212 93.361 79.494 68.000 58.430 50.454 43.750 38.089 33.313 29.244 25.766 22.792 20.230 18.019 16.102 14.437 12.984 11.710 10.591 9.604 8.731 7.957 7.269 6.655 NCPppXQ681 680 3650K Resistance () 17104.854 12685.248 9505.855 7193.219 5493.436 4229.599 3283.675 2568.411 2024.158 1606.275 1283.691 1032.245 835.351 680.000 556.733 458.287 379.320 315.504 263.749 221.579 186.998 158.499 134.960 115.383 99.029 85.356 73.839 64.140 55.905 48.888 42.918 37.795 33.409 29.618 4 NCPppXM221 NCPppXM331 220 330 3500K 3500K Resistance () Resistance () 4947.904 7421.856 3703.755 5555.632 2798.873 4198.309 2135.887 3203.831 1645.037 2467.555 1278.034 1917.051 1000.620 1500.930 789.612 1184.418 627.752 941.628 502.474 753.711 405.010 607.514 328.480 492.720 268.044 402.066 220.000 330.000 181.576 272.365 150.668 226.002 125.681 188.521 105.336 158.004 88.717 133.076 75.059 112.588 63.777 95.666 54.415 81.622 46.631 69.946 40.115 60.172 34.637 51.955 30.013 45.019 26.110 39.165 22.790 34.186 19.957 29.935 17.541 26.312 15.453 23.180 13.663 20.494 12.114 18.171 10.778 16.168 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 14 1 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332 2.2k 3.3k 1k Resistance 1k 1.5k 1.5k 2.2k 3.3k 3650K 3950K B-Constant 3500K 3500K 3500K 3950K 3500K 3950K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Y40 21.266 25.154 31.899 51.791 46.786 70.179 113.941 75.961 Y35 16.150 18.655 24.225 37.172 35.530 53.295 81.779 54.520 Y30 12.347 13.979 18.520 27.005 27.162 40.743 59.411 39.607 Y25 9.503 10.578 14.255 19.843 20.907 31.360 43.654 29.103 Y20 7.365 8.079 11.047 14.728 16.203 24.304 32.401 21.601 Y15 5.747 6.220 8.621 11.044 12.644 18.966 24.297 16.198 Y10 4.516 4.829 6.773 8.362 9.934 14.901 18.396 12.264 Y5 3.572 3.777 5.358 6.389 7.858 11.787 14.055 9.370 0 2.844 2.977 4.266 4.922 6.257 9.386 10.829 7.219 5 2.280 2.362 3.419 3.825 5.015 7.523 8.414 5.609 10 1.839 1.888 2.758 2.994 4.045 6.067 6.586 4.391 15 1.492 1.518 2.238 2.361 3.283 4.924 5.195 3.463 20 1.218 1.229 1.827 1.876 2.680 4.019 4.126 2.751 25 1.000 1.000 1.500 1.500 2.200 3.300 3.300 2.200 30 0.825 0.819 1.238 1.207 1.816 2.724 2.656 1.771 35 0.685 0.674 1.027 0.978 1.507 2.260 2.152 1.434 40 0.571 0.558 0.857 0.797 1.257 1.885 1.753 1.169 45 0.479 0.464 0.718 0.653 1.053 1.580 1.437 0.958 50 0.403 0.388 0.605 0.538 0.887 1.331 1.184 0.789 55 0.341 0.326 0.512 0.446 0.751 1.126 0.981 0.654 60 0.290 0.275 0.435 0.371 0.638 0.957 0.817 0.545 65 0.247 0.233 0.371 0.311 0.544 0.816 0.684 0.456 70 0.212 0.199 0.318 0.261 0.466 0.700 0.575 0.383 75 0.182 0.170 0.274 0.221 0.401 0.602 0.486 0.324 80 0.157 0.146 0.236 0.187 0.346 0.520 0.412 0.275 85 0.136 0.126 0.205 0.160 0.300 0.450 0.351 0.234 90 0.119 0.109 0.178 0.137 0.261 0.392 0.301 0.200 95 0.104 0.094 0.155 0.117 0.228 0.342 0.258 0.172 100 0.091 0.082 0.136 0.101 0.200 0.299 0.223 0.149 105 0.080 0.072 0.120 0.088 0.175 0.263 0.193 0.129 110 0.070 0.063 0.105 0.076 0.155 0.232 0.168 0.112 115 0.062 0.056 0.093 0.067 0.137 0.205 0.146 0.098 120 0.055 0.049 0.083 0.058 0.121 0.182 0.128 0.085 125 0.049 0.044 0.074 0.051 0.108 0.162 0.113 0.075 Part Number NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 NCPppXH103 NCPppXV103 NCPppXH153 NCPppXW153 4.7k 4.7k 6.8k 6.8k 10k 10k 15k 15k Resistance 3950K 3950K B-Constant 3500K 3380K 3950K 3380K 3900K 3380K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Y40 105.705 162.279 133.043 234.787 195.652 328.996 293.478 517.912 Y35 79.126 116.474 100.756 168.515 148.171 237.387 222.256 371.724 Y30 59.794 84.615 77.076 122.422 113.347 173.185 170.021 270.048 Y25 45.630 62.173 59.540 89.953 87.559 127.773 131.338 198.426 Y20 35.144 46.147 46.401 66.766 68.237 95.327 102.355 147.278 Y15 27.303 34.604 36.482 50.066 53.650 71.746 80.474 110.439 Y10 21.377 26.200 28.904 37.906 42.506 54.564 63.759 83.617 Y5 16.869 20.018 23.047 28.963 33.892 41.813 50.838 63.888 0 13.411 15.423 18.509 22.313 27.219 32.330 40.828 49.221 5 10.735 11.984 14.974 17.338 22.021 25.194 33.032 38.245 10 8.653 9.380 12.189 13.571 17.926 19.785 26.888 29.936 15 7.018 7.399 9.978 10.705 14.674 15.651 22.010 23.613 20 5.726 5.877 8.215 8.503 12.081 12.468 18.121 18.756 25 4.700 4.700 6.800 6.800 10.000 10.000 15.000 15.000 30 3.879 3.783 5.654 5.474 8.315 8.072 12.472 12.074 35 3.219 3.064 4.725 4.434 6.948 6.556 10.422 9.780 40 2.685 2.497 3.967 3.613 5.834 5.356 8.751 7.969 45 2.250 2.046 3.344 2.961 4.917 4.401 7.375 6.531 50 1.895 1.686 2.829 2.440 4.161 3.635 6.241 5.382 55 1.604 1.397 2.404 2.022 3.535 3.019 5.302 4.459 60 1.363 1.164 2.050 1.683 3.014 2.521 4.521 3.713 65 1.163 0.974 1.759 1.409 2.586 2.115 3.879 3.108 70 0.996 0.819 1.515 1.185 2.228 1.781 3.341 2.613 75 0.857 0.692 1.309 1.001 1.925 1.509 2.887 2.208 80 0.740 0.587 1.135 0.849 1.669 1.284 2.503 1.873 85 0.641 0.500 0.988 0.724 1.452 1.097 2.178 1.597 90 0.558 0.428 0.862 0.620 1.268 0.941 1.902 1.367 95 0.487 0.368 0.755 0.532 1.110 0.810 1.664 1.174 100 0.426 0.318 0.662 0.459 0.974 0.701 1.461 1.013 105 0.375 0.275 0.583 0.398 0.858 0.608 1.287 0.878 110 0.330 0.239 0.515 0.346 0.758 0.530 1.137 0.763 115 0.292 0.208 0.457 0.302 0.672 0.463 1.007 0.665 120 0.259 0.182 0.406 0.264 0.596 0.406 0.895 0.582 125 0.230 0.160 0.361 0.232 0.531 0.358 0.797 0.511 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 4 2 15 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. 4 Part Number NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 NCPppWL333 NCPppWB473 NCPppWL473 22k 22k 22k 33k 33k 33k 47k 47k Resistance 3380K 3950K 4485K 4050K 4250K 4485K 4050K 4485K B-Constant Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Y40 759.605 1073.436 1227.263 1451.049 1610.154 1747.920 430.434 2293.249 Y35 545.196 753.900 874.449 1019.238 1130.850 1245.428 325.976 1610.605 Y30 396.070 535.073 630.851 725.084 802.609 898.485 249.364 1143.110 Y25 291.025 383.590 460.457 522.021 575.385 655.802 192.629 819.487 Y20 216.008 277.643 339.797 379.842 416.464 483.954 150.121 593.146 Y15 161.977 202.813 253.363 279.371 304.219 360.850 118.029 433.281 Y10 122.638 149.462 190.766 207.566 224.193 271.697 93.514 319.305 Y5 93.702 111.082 144.964 155.639 166.623 206.463 74.563 237.312 0 72.191 83.233 111.087 117.814 124.850 158.214 59.881 177.816 5 56.093 62.858 85.842 89.925 94.287 122.259 48.446 134.287 10 43.907 47.831 66.861 69.204 71.747 95.227 39.436 102.184 15 34.633 36.664 52.470 53.675 54.996 74.730 32.282 78.327 20 27.509 28.304 41.471 41.937 42.455 59.065 26.577 60.467 25 22.000 22.000 33.000 33.000 33.000 47.000 22.000 47.000 30 17.709 17.214 26.430 26.143 25.822 37.643 18.292 36.776 35 14.344 13.557 21.298 20.845 20.335 30.334 15.285 28.962 40 11.688 10.744 17.266 16.723 16.115 24.591 12.834 22.952 45 9.578 8.566 14.076 13.498 12.849 20.048 10.817 18.301 50 7.894 6.871 11.538 10.954 10.306 16.433 9.154 14.679 55 6.540 5.544 9.506 8.940 8.317 13.539 7.777 11.845 60 5.446 4.498 7.870 7.334 6.748 11.209 6.631 9.610 65 4.559 3.669 6.549 6.046 5.504 9.328 5.690 7.839 70 3.832 3.009 5.475 5.011 4.513 7.798 4.901 6.427 75 3.239 2.479 4.595 4.170 3.718 6.544 4.234 5.296 80 2.748 2.052 3.874 3.487 3.078 5.518 3.671 4.384 85 2.342 1.707 3.282 2.928 2.560 4.674 3.195 3.646 90 2.004 1.426 2.789 2.469 2.139 3.972 2.790 3.046 95 1.722 1.196 2.379 2.091 1.794 3.388 2.441 2.555 100 1.486 1.008 2.038 1.777 1.511 2.902 2.142 2.152 105 1.287 0.852 1.751 1.516 1.278 2.494 1.888 1.820 110 1.119 0.724 1.509 1.298 1.085 2.150 1.668 1.546 115 0.975 0.617 1.306 1.116 0.925 1.860 1.477 1.318 120 0.854 0.528 1.134 0.962 0.792 1.615 1.312 1.128 125 0.750 0.454 0.987 0.832 0.681 1.406 1.169 0.970 Part Number NCPppWD683 NCPppWF683 NCPppWL683 NCPppWF104 NCP18WF104F NCPppWL104 NCPppWL154 NCPppWM154 150k 150k Resistance 68k 100k 68k 68k 100k 100k1% 4485K 4500K B-Constant 4150K 4485K 4250K 4485K 4250K 4200K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Y40 2735.359 4879.254 7318.881 2990.041 7899.466 3317.893 4397.119 4205.686 Y35 1937.391 3426.818 5140.228 2100.247 5466.118 2330.237 3088.599 2966.436 Y30 1389.345 2432.149 3648.224 1494.113 3834.499 1653.862 2197.225 2118.789 Y25 1008.014 1743.590 2615.385 1075.679 2720.523 1185.641 1581.881 1531.319 Y20 738.978 1262.012 1893.018 782.705 1951.216 858.168 1151.037 1118.422 Y15 547.456 921.875 1382.813 575.674 1415.565 626.875 846.579 825.570 Y10 409.600 679.373 1019.059 427.712 1036.984 461.974 628.988 615.526 Y5 309.217 504.919 757.379 320.710 767.079 343.345 471.632 463.104 0 235.606 378.333 567.499 242.768 572.667 257.266 357.012 351.706 5 180.980 285.717 428.575 185.300 431.264 194.287 272.500 269.305 10 140.139 217.414 326.121 142.603 327.405 147.841 209.710 207.891 15 109.344 166.654 249.981 110.602 250.538 113.325 162.651 161.722 20 85.929 128.653 192.979 86.415 193.166 87.484 127.080 126.723 25 68.000 100.000 150.000 68.000 150.000 68.000 100.000 100.000 30 54.167 78.247 117.370 53.871 117.281 53.208 79.222 79.439 35 43.421 61.622 92.433 42.954 92.293 41.903 63.167 63.509 40 35.016 48.835 73.252 34.460 73.090 33.208 50.677 51.084 45 28.406 38.937 58.406 27.814 58.240 26.477 40.904 41.336 50 23.166 31.231 46.846 22.572 46.665 21.237 33.195 33.628 55 18.997 25.202 37.803 18.422 37.605 17.137 27.091 27.510 60 15.657 20.448 30.671 15.113 30.453 13.904 22.224 22.621 65 12.967 16.679 25.018 12.459 24.804 11.342 18.323 18.692 70 10.794 13.675 20.513 10.325 20.293 9.299 15.184 15.525 75 9.021 11.268 16.902 8.592 16.679 7.662 12.635 12.947 80 7.575 9.329 13.993 7.185 13.776 6.343 10.566 10.849 85 6.387 7.758 11.638 6.033 11.428 5.276 8.873 9.129 90 5.407 6.481 9.721 5.087 9.520 4.407 7.481 7.713 95 4.598 5.437 8.155 4.309 7.966 3.697 6.337 6.546 100 3.922 4.580 6.869 3.661 6.688 3.114 5.384 5.572 105 3.359 3.873 5.810 3.124 5.639 2.634 4.594 4.764 110 2.887 3.289 4.933 2.675 4.772 2.236 3.934 4.087 115 2.489 2.804 4.206 2.299 4.052 1.907 3.380 3.518 120 2.155 2.400 3.601 1.983 3.454 1.632 2.916 3.040 125 1.870 2.064 3.096 1.715 2.955 1.403 2.522 2.634 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 16 3 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWL224 NCPppWM224 NCPppWM474 220k 470k Resistance 220k 4500K 4500K B-Constant 4485K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Y40 11585.884 10734.358 24751.661 Y35 8016.973 7539.001 17127.169 Y30 5623.931 5350.729 12014.762 Y25 3990.100 3835.898 8524.305 Y20 2861.784 2776.427 6113.811 Y15 2076.162 2028.126 4435.437 Y10 1520.909 1494.620 3249.216 Y5 1125.049 1110.822 2403.515 0 839.912 832.332 1794.358 5 632.521 628.577 1351.294 10 480.194 478.310 1025.870 15 367.455 366.639 785.018 20 283.310 283.036 605.252 25 220.000 220.000 470.000 30 172.012 172.143 367.480 35 135.364 135.569 289.186 40 107.198 107.436 229.014 45 85.419 85.662 182.485 50 68.441 68.708 146.215 55 55.153 55.444 117.828 60 44.665 44.984 95.420 65 36.379 36.694 77.718 70 29.763 30.085 63.584 75 24.462 24.789 52.260 80 20.205 20.523 43.166 85 16.761 17.068 35.808 90 13.962 14.258 29.828 95 11.684 11.961 24.961 100 9.809 10.075 20.955 105 8.270 8.521 17.668 110 6.998 7.236 14.951 115 5.942 6.169 12.695 120 5.067 5.281 10.824 125 4.334 4.540 9.259 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 4 4 17 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type !Caution/Notice s !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist s !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. 4 s Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. s Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. s Notice (Handling) The ceramic of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping. 18 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type !Caution/Notice s Notice (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate this product horizontal to the direction in which stress acts. Mounting Close to Board Separation Line Perforation Holes C B D Slit A Keep this product on the PC Board away from the Separation Line. Worst A-C-B-D Better 2. Allowable Soldering Temperature and Time (a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260C, twice -> The total accumulated soldering time at 260C is within 30 seconds.) 4 NCP03/15 Series Allowable Reflow Soldering Temp. and Time 280 Temperature (C) 270 260 250 240 230 220 0 10 20 30 40 50 Time (sec.) 60 70 80 90 NCP18/21 Series Allowable Flow Soldering Temp. and Time 280 Temperature (C) Temperature (C) 270 260 250 240 230 220 210 0 10 20 Time (sec.) 30 Allowable Reflow Soldering Temp. and Time 280 270 260 250 240 230 220 210 0 10 20 30 40 50 60 70 80 90 100 110 Time (sec.) Continued on the following page. 1 19 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 3. Recommended Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on ceramic body. The difference between preheating temperature and maximum temperature in the profile shall be 100 C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. NCP03/15 Series Reflow Soldering Conditions Preheating (in air) Temperature (C) 300 200 100 0 Soldering Gradual Cooling (in air) 1-2 min. *20sec. * In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure 2 above. Preheating: 16010C, 1-2 min. Soldering: 240-270C, 20sec. NCP18/21 Series 4 Flow Soldering Conditions Preheating (in air) Temperature (C) 300 200 100 0 1-2 min. *10sec. Preheating: 16010C, 1-2 min. Soldering: 230-260C, 10sec. Soldering Gradual Cooling (in air) Reflow Soldering Conditions Preheating (in air) Temperature (C) 300 200 100 0 Soldering Gradual Cooling (in air) 1-2 min. *20sec. Preheating: 16010C, 1-2 min. Soldering: 230-270C, 20sec. 4. Solder and Flux (1) Solder and Paste (a) Reflow Soldering: NCP03/15/18/21 Series Use RA/RMA type or equivalent type of solder paste. For your reference, we are using the solder paste below for any internal tests of this product. *RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%) (Manufactured by Alpha Metals Japan Ltd.) *M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%) (Manufactured by Senju Metal Industry Co., Ltd.) (b) Flow Soldering: NCP18/21 Series We are using the solder paste below for any internal tests of this product. *Sn:Pb=63wt%:37wt% *Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt% (2) Flux Use rosin type flux in soldering process. If the flux listed below is used, some problems might be caused in the product characteristics and reliability. Please do not use the following flux. * Strong acidic flux (with halide content exceeding 0.1wt%). * Water-soluble flux (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 5. Cleaning Conditions For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality. * Please keep mounted parts and a substrate from an occurrence of resonance in ultrasonic cleaning. * Please do not clean the products in the case of using a non-washed type flux. NCP03/15 Solvent Dipping Cleaning Isopropyl Alcohol Less than 5 minutes at room temp. or less than 2 minutes at 40C max. NCP18/21 Isopropyl Alcohol Less than 5 minutes at room temp. or less than 2 minutes at 40C max. Less than 1 minute and 20W/r Frequency of several 10kHz to 100kHz Less than 5 minutes and 20W/r Ultrasonic Cleaning Frequency of 28kHz to 40kHz 6. Drying After cleaning, promptly dry this product. Continued on the following page. 20 2 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 7. Printing Conditions of Solder Paste The amount of solder is critical. Standard height of fillet is shown in the table below. Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage. Reference: Optimum Solder Amount E T Electrode Solder Solder Part Number NCP03 NCP15 NCP18/NCP21 The Solder Paste Thickness 100m 150m 200m T 1/3EVTVE 1/3EVTVE 0.2mmVTVE 8. Adhesive Application and Curing Thin or insufficient adhesive may result in loose component contact with land during flow soldering. Low viscosity adhesive causes chips to slip after mounting. 4 3 21 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Package Minimum Quantity Guide Quantity (pcs.) Part Number NCP03 NCP15 NCP18 NCP21 Paper Tape 15,000 10,000 4,000 4,000 Embossed Tape Tape Carrier Packaging 1. Dimensions of Reel 2.00.5 o60 W1.0 Y0 9.0 W1.0 Y0 13.01.0 o13.00.2 o21.00.8 4 o180 W0 Y1.5 (in mm) 2. Taping Method (1) A tape in a reel contains Leader unit and Trailer unit where products are not packed. (Please refer to the figure at the right.) (2) The top and base tapes or, plastic and cover tape are not stuck at the first five pitches minimum. (3) A label should be attached on the reel. (MURATA's part number, inspection number and quantity should be marked on the label.) (4) Taping reels are packed in a package. Direction of Feed Chip-mounting Unit 40 min. Trailer Unit Leader Unit 190-250 210-250 Vacant Section Top Tape alone Cover Tape alone (in mm) Continued on the following page. 1 22 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Package Continued from the preceding page. 3. Paper Tape (NCP03/15/18 Series) NCP03 Series 1.750.1 2.00.05 4.00.1 o1.5+0.1/-0 0.5 max. NCP15 Series 2.00.05 4.00.1 1.750.1 o1.5+0.1/-0 0.8 max. 3.50.05 8.00.3 3.50.05 0.65 Direction of Feed 0.68 0.38 Direction of Feed 1.15 Reference Value Reference Value NCP18 Series 2.00.05 4.00.1 4.00.1 1.750.1 o1.5+0.1/-0 1.1 max. 8.00.3 3.50.05 1.85 1.05 Direction of Feed Reference Value 8.00.3 4 (in mm) (1) Other Conditions (a) Packaging Products are packaged in the cavity of the base tape and sealed by top tape and bottom tape. (b) Tape Top tape and bottom tape have no joints and products are packaged and sealed in the cavity of the base tape, continuously. (2) Peeling Force of Top Tape 165-180 F 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape. 2 Peeling speed: 300mm/min. 3 Peeling force: 0.1 - 0.6N (3) Pull Strength Pull strength of top tape is specified at 10N minimum. Pull strength of bottom tape should be specified 5N minimum. Continued on the following page. 2 23 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temp. Sensor and Compensation Chip Type Package Continued from the preceding page. 4. Embossed Tape (NCP21 Series) (1) Other Conditions Products are packaged in each cavity of the Embossed tape and sealed by Cover tape. (b) Tape 2.25 2.00.05 4.00.1 4.00.1 1.750.1 3.50.05 1.0 +0.3 -0 (a) Packaging 1.5 -1 +0.1 1.05 0.2 Cover tape has no joints. 1.45 Reference Value Direction of Feed 8.00.3 (in mm) (2) Peeling Force of Cover Tape 165-180 F 4 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape. 2 Peeling speed: 300mm/min. 3 Peeling force: 0.1 - 0.7N (3) Tape Strength Pull strength of Embossed tape and Cover tape should be specified 10N minimum. 3 24 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor Thermo String Type 1.20.4 1.20.4 This product is a small flexible lead type NTC Thermistor with a small head and a thin lead wire. 25 to 1002 110 to 1503 s Features 1. High accuracy and highly sensitive temperature sensing is mode possible by the small size and high accuracy NTC Thermistor. 2. Narrow space temperature sensing is made possible by the small sensing head and the thin lead wire. 3. Flexibility and a wide variety of lengths (25 mm to 150mm) enables the design of flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long-term aging stability 6. This is halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL (UL1434, File No. E137188). 3+2/-1 o0.300.05 The full length 25mm, 30 to 150mm Interval 10mm. (in mm) NXFT15_1B Type(twist) 1.20.4 1.20.4 25 to 1002 110 to 1503 5 o0.300.05 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25C) (ohm) B-Constant (25-50C) (K) 3380 1% 4050 1% 4250 1% B-Constant B-Constant B-Constant (25-80C) (25-85C) (25-100C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) 3423 4091 4303 3431 4097 4311 3452 4114 4334 3+2/-1 s Applications The full length 25mm, 30 to 150mm Interval 10mm. (in mm) NXFT15_2B Type(without twist) Part Number Operating Current for Sensor (25C) (mA) 0.12 0.06 0.04 Rated Electric Typical Dissipation Thermal Time Power (25C) Constant (25C) Constant (mW) (mW/C) (25C) (s) 7.5 7.5 7.5 1.5 1.5 1.5 4 4 4 NXFT15XH103FApBppp 10k 1% NXFT15WB473FApBppp 47k 1% NXFT15WF104FApBppp 100k 1% p is the filled with lead shape (1: twist, 2: without twist). ppp is the filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm) Operating Current for Sensor rises Thermistor's temperature by 0.1C Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 30C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 25 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Thermo String Type Specifications and Test Methods No. 1 2 3 Item High Temperature Storage Test Low Temperature Storage Test Humidity Storage Test Specifications Test Methods 1252C in air, for 1000 +48/-0 hours without loading. -40 +0/-3C in air, for 1000 +48/-0 hours without loading. 602C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. -40 +0/-3C, 30 minutes in air +252C, 10 to 15 minutes in air +1252C, 30 minutes in air + 25 +2/-0C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 852C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs. * No damage electrical characteristics at DC100 V, 1 min. 2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 35010C solder for 3.50.5 seconds, or 2605C solder for 101 seconds according to Fig-1 (solder * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 4 Temperature Cycle * Resistance (R25C) fluctuation rate: less than 2%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 5 High Temperature Load Insulation Break down Voltage 6 7 Resistance to Soldering Heat * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 5 Solder 1 to 2mm Fig-1 Both lead wires are dipped into flux (25wt% colophony 8 Solderability More than 90% of lead wire surface shall be covered by solder. 9 Lead Wire Pull Strength * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 1N (10 sec.) Fig-2 Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire. Lead Wire Bending Strength 10 * Lead wire does not break. 10N (3 sec.) Fig-3 * * R25 is zero-power resistance at 25C. * B25/50 is calculated by zero-power resistance of Thermistor in 25C -50C. * After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). Continued on the following page. 26 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Thermo String Type Specifications and Test Methods Continued from the preceding page. No. Item Specifications Test Methods NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for each 2 hours duration. 11 Free Fall 12 Vibration * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * No visible damage at resin part. Mount Oscillating Direction Z Solder is attached from the reverse side. Oscillating Direction Y Oscillating Direction X * * R25 is zero-power resistance at 25C. * B25/50 is calculated by zero-power resistance of Thermistor in 25C -50C. * After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 5 27 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor Lead Type 3.0 max. (3.3 max.) 1.8 max. (2.5 max.) 1. High accuracy of B-Constant tolerance +/-0.5% +/-1% of resistance and +/-0.5% of B-Constant is realized due to technical advantages of the material and manufacturing process. 2. Quick response This product provides faster response time due to its smaller size. 3. Taping type is available. 4. Strong lead strength Original lead-wiring technique assures reliable connection. It can be formed and bent flexibly according to the mounting conditions. 311 s Features 6.0 max. This product is a sensor type NTC Thermistor developed by our unique ceramic technology and automatic assemble, to be used in normal temperature ranges. Epoxy Resin Solder Plated Copper Ply Wire o0.40.03 2.51.0 Applicable to NTSA0XM202, NTSA0WB203 and NTSA0WC303 Types. (in mm) s Applications 1. Rechargeable batteries 2. Battery charging circuits 3. Printer heads 4. DC fan motors 5. Home appliance equipment 6 Part Number NTSA0XM202pE1B0 NTSA0XR502pE1B0 NTSA0XH103pE1B0 NTSA0XV103pE1B0 NTSA0WB203pE1B0 NTSA0WC303pE1B0 NTSA0WD503pE1B0 NTSA0WF104pE1B0 Resistance (25C) (ohm) 2.0k 5.0k 10k 10k 20k 30k 50k 100k B-Constant (25-50C) (K) 3500 0.5% 3700 1% 3380 0.5% 3900 0.5% 4050 1% 4100 1% 4150 1% 4250 1% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) 3523 3727 3428 3930 4078 4128 4205 4303 3526 3738 3434 3934 4080 4130 4213 4311 3543 3760 3455 3944 4096 4147 4234 4334 1.05 0.68 0.38 0.46 0.31 0.26 0.20 0.14 21 15 15 15 21 21 15 15 2.1 1.5 1.5 1.5 2.1 2.1 1.5 1.5 7 7 7 7 7 7 7 7 p is filled with resistance tolerance codes (F: 1%, E: 3%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C Taping type of part numbers with "N6A0" is available (Lead Spacing=5mm, Lead Diameter=o0.5mm). 28 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Temperature Sensor Lead Insulation Type 3.0 max. (3.8 max.) 2.0 max. (2.5 max.) s Features 1. Electric insulation on lead wire 2. Excellent bending resistance due to suitable hardness of surface coating 3. Easy handling due to most suitable hardness of surface of coating 4. High accuracy of B-Constant tolerance +/-0.5% +/-1% of resistance and +/-0.5% of B-Constant is realized due to technical advantages of the material and manufacturing processes. 0.60-0.95 31.5 2.5 -0.5 51 +1.5 27.02.0 (Coating Area) This product is a sensor type NTC Thermistor developed by our unique ceramic technology and automatic assemble, to be used in normal temperature ranges. o0.40.03 (Solder Plated Copper Ply Wire) Applicable to NTSD0XM202, NTSD0WB203 and NTSD0WC303 Types. (in mm) NTSD0 Series 3.0 max. (3.8 max.) 2.0 max. (2.5 max.) Epoxy Resin o0.460.03 Polyurethane Wire L 2.0 2.5-0.5 +1.5 s Applications 1. Rechargeable batteries 2. Battery charging circuits 3. Printer heads 4. DC fan motors 5. Home appliance equipment NTSD1 Series o0.450.05 Sn-Ag Solder Copper Wire NTSD1XM202/NTSD1WB203/NTSD1WC303 Types Type NTSD1_FPB30 NTSD1_FPB40 NTSD1_FPB50 L (mm) 30 40 50 2.51.2 (0.8) (in mm) NTSD0 Series Part Number NTSD0XM202pE1B0 NTSD0XR502pE1B0 NTSD0XH103pE1B0 NTSD0XV103pE1B0 NTSD0WB203pE1B0 NTSD0WC303pE1B0 NTSD0WD503pE1B0 NTSD0WF104pE1B0 Resistance (25C) (ohm) 2.0k 5.0k 10k 10k 20k 30k 50k 100k B-Constant (25-50C) (K) 3500 0.5% 3700 1% 3380 0.5% 3900 0.5% 4050 1% 4100 1% 4150 1% 4250 1% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) 3523 3727 3428 3930 4078 4128 4205 4303 3526 3738 3434 3934 4080 4130 4213 4311 3543 3760 3455 3944 4096 4147 4234 4334 1.05 0.68 0.38 0.46 0.31 0.26 0.20 0.14 21 15 15 15 21 21 15 15 2.1 1.5 1.5 1.5 2.1 2.1 1.5 1.5 7 7 7 7 7 7 7 7 7 p is filled with resistance tolerance codes (F: 1%, E: 3%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C NTSD1 Series Part Number NTSD1XM202FPBpp NTSD1XR502FPBpp NTSD1XH103FPBpp NTSD1XV103FPBpp NTSD1WB203FPBpp NTSD1WC303FPBpp Resistance (25C) (ohm) 5.0k 1% B-Constant (25-50C) (K) 3700 1% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) 3523 3727 3428 3930 4078 4128 3526 3738 3434 3934 4080 4130 3543 3760 3455 3944 4096 4147 1.05 0.68 0.38 0.46 0.31 0.26 21 15 15 15 21 21 2.1 1.5 1.5 1.5 2.1 2.1 7 7 7 7 7 7 2.0k 1% 3500 0.5% 10k 1% 3380 0.5% 10k 1% 3900 0.5% 20k 1% 30k 1% 4050 1% 4100 1% Continued on the following page. 29 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Continued from the preceding page. Part Number NTSD1WD503FPBpp NTSD1WF104FPBpp Resistance (25C) (ohm) 50k 1% 100k 1% B-Constant (25-50C) (K) 4150 1% 4250 1% B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) 4205 4303 4213 4311 4234 4334 0.20 0.14 15 15 1.5 1.5 7 7 pp is filled with Total-length codes (30, 40, 50). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35C by self heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C s Temperature Tolerance - Temperature Characteristics Resistance Tolerance: +/-1% B-Constant Tolerance: +/-1% 3.0 Resistance Tolerance: +/-1% B-Constant Tolerance: +/-0.5% 3.0 Temperature Tolerance (C) 2.0 Temperature Tolerance (C) 0 50 Temperature (C) 100 150 2.0 1.0 1.0 0 -50 0 -50 0 50 Temperature (C) 100 150 7 30 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Temperature Characteristics (Center Value) Part Number NXFpXH103 NXFpWB473 NXFpWF104 10k 47k 100k Resistance 3380K 4050K 4250K B-Constant Temp. (C) Resistance (k) Resistance (k) Resistance (k) Y40 197.388 1690.590 4221.280 Y35 149.395 1215.320 2995.040 Y30 114.345 882.908 2147.000 Y25 88.381 647.911 1554.600 Y20 68.915 480.069 1136.690 Y15 54.166 359.009 839.019 Y10 42.889 270.868 624.987 Y5 34.196 206.113 469.678 0 27.445 158.126 355.975 5 22.165 122.267 272.011 10 18.010 95.256 209.489 15 14.720 74.754 162.559 20 12.099 59.075 127.057 25 10.000 47.000 100.000 30 8.309 37.636 79.222 35 6.939 30.326 63.167 40 5.824 24.583 50.677 45 4.911 20.043 40.904 50 4.160 16.433 33.195 55 3.539 13.545 27.091 60 3.024 11.223 22.224 65 2.593 9.345 18.323 70 2.233 7.818 15.184 75 1.929 6.571 12.635 80 1.673 5.548 10.566 85 1.455 4.704 8.873 90 1.270 4.004 7.481 95 1.112 3.422 6.337 100 0.976 2.936 5.384 105 0.860 2.528 4.594 110 0.759 2.184 3.934 115 0.673 1.893 3.380 120 0.598 1.646 2.916 125 0.532 1.436 2.522 Part Number NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104 Resistance 20k 30k 50k 100k 2.0k 5.0k 10k 10k B-Constant 3500K 3700K 3380K 3900K 4050K 4100K 4150K 4250K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Y40 733.007 44.657 1149.500 123.484 1948.575 195.652 4256.752 347.808 Y35 524.831 33.505 819.651 92.295 1387.289 148.171 3005.888 248.591 Y30 380.184 25.388 591.391 69.614 999.456 113.347 2148.514 179.973 Y25 277.845 19.402 430.529 52.860 728.895 87.559 1555.020 131.832 Y20 205.260 14.961 316.870 40.480 537.039 68.237 1137.312 97.679 Y15 153.642 11.644 236.337 31.275 399.167 53.650 839.314 73.119 Y10 116.016 9.133 177.842 24.339 299.469 42.506 625.338 55.301 Y5 88.125 7.198 134.630 19.154 226.186 33.892 469.127 42.257 0 67.522 5.716 102.816 15.148 172.393 27.219 355.224 32.582 5 52.168 4.571 79.183 11.964 132.857 22.021 272.045 25.324 10 40.617 3.682 61.460 9.520 103.089 17.926 209.803 19.847 15 31.847 2.987 48.045 7.624 80.430 14.674 162.713 15.679 20 25.151 2.437 37.834 6.160 63.201 12.081 127.117 12.478 25 20.000 2.000 30.000 5.000 50.000 10.000 100.000 10.000 30 16.014 1.651 23.955 4.082 39.825 8.315 79.215 8.068 35 12.902 1.371 19.249 3.354 31.918 6.948 63.150 6.552 40 10.457 1.143 15.560 2.773 25.733 5.834 50.649 5.353 45 8.527 0.958 12.657 2.299 20.877 4.917 40.885 4.399 50 6.993 0.807 10.354 1.914 17.034 4.161 33.195 3.635 55 5.771 0.683 8.525 1.607 13.929 3.535 27.014 3.020 60 4.789 0.582 7.058 1.356 11.439 3.014 22.079 2.521 65 3.992 0.497 5.869 1.149 9.485 2.586 18.226 2.115 70 3.343 0.426 4.905 0.978 7.906 2.228 15.124 1.783 75 2.809 0.367 4.113 0.834 6.614 1.925 12.598 1.510 80 2.376 0.318 3.472 0.714 5.558 1.669 10.542 1.284 85 2.020 0.276 2.945 0.612 4.686 1.452 8.852 1.096 90 1.724 0.240 2.509 0.527 3.967 1.268 7.463 0.939 95 1.476 0.210 2.143 0.456 3.373 1.110 6.321 0.808 100 1.264 0.183 1.832 0.396 2.878 0.974 5.374 0.698 105 1.085 0.161 1.571 0.345 2.465 0.858 4.585 0.605 110 0.935 0.142 1.350 0.302 2.118 0.758 3.925 0.527 115 0.812 0.125 1.171 0.264 1.828 0.671 3.376 0.460 120 0.708 0.111 1.019 0.232 1.583 0.596 2.913 0.403 125 0.617 0.099 0.886 0.205 1.374 0.531 2.520 0.354 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 7 1 31 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Thermo String Type/Lead Type !Caution/Notice s !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist s !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. s Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. s Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. 7 s Notice (Soldering and Mounting) NTS Series 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire. 32 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Thermo String Type/Lead Type !Caution/Notice s Notice (Soldering and Mounting) NXF Series Please notice as shown below when you mount this product. 1. When you solder this product, do not melt the solder in resin head. If you melt the solder in resin head, there is the possibility of breaks in the wire, shorts and breaks of the lead insulation. In case you cut the lead wire of this product less than 20mm from resin head, the heat of melted solder at lead wire edge is propagated easily to the resin head along the lead wire. 2. Do not touch the resin head directly with solder iron. It may cause the melting of solder in resin head. 3. Do not separate the parallel lead wires 10mm or less from the resin head, when you separate parallel lead wires. 4. If you mold by resin this product, please evaluate the quality before you use it. 5. Do not bend the lead wire radius 1mm or less when you bend the lead wire. s Notice (Handling) 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock while handling. Such forces may cause cracking or chipping. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut. 7 33 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Temperature Sensor Thermo String Type/Lead Type Package Minimum Order Quantity Bulk Part Number NXFT NTSA_E1B0 NTSD0 NTSD1_30 NTSD1_40 NTSD1_50 Minimum Quantity (pcs.) 1,000 500 500 500 200 200 NTSA_N6A0 Ammo Pack Taping Part Number Minimum Quantity (pcs.) 3,000 - Taping Dimensions (NTSA_N6A0 Series) P2 P D e H2 P1 F L H0 W0 W1 W od W2 S h2 h1 T t2 I P0 oD0 t1 Item Pitch of Component Pitch of Sprocket Hole Lead Spacing Length from Hole Center to Component Center Length from Hole Center to Lead Body Diameter Deviation along Tape, Left or Right Carrier Tape Width Position of Sprocket Hole Lead Distance between Reference and Bottom Planes Height of Component Protrusion Length Diameter of Sprocket Hole Lead Diameter Total Tape Thickness Total Thickness, Tape and Lead Wire Deviation across Tape Portion to Cut in Case of Defect Hold down Tape Width Hold down Tape Position Coating Extension on Lead Body Thickness Code P P0 F P2 P1 D S W W1 H0 H2 I D0 d t1 t2 h1, h2 L W0 W2 e T Dimensions (mm) 12.7 12.70.3 5.0+0.8/-0.2 6.351.3 3.850.8 3.5 max. 02.0 18.00.5 9.00.5 16.01.0 4.0 max. +0.5 to -1.0 4.00.1 0.500.03 0.60.3 1.6 max. 1.0 max. 11.0+0/-2.0 11.0 min. 1.51.5 Up to the crimp point 2.6 max. 7 (in mm) 34 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 NTC Thermistors Inrush Current Suppression Lead Type NTPAN : 23.0 max. NTPAJ : 20.0 max. s Features 1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection or the coating resin. 2. Most suitable for power supplies of less than 100W 3. Excellent recovery characteristics due to resin coating with excellent heat characteristics 4. Highly reliable Coating Extension on Lead : to line A A 3.51.0 10.0 max. This product effectively suppresses surge currents which are generated when switching power regulators are turned on. 5.5 max. o0.80.05 Sn plated Cu wire NTPAN/NTPAJ Series 10.01.5 (in mm) s Applications 1. Switching power supplies 2. CRT monitors 3. Televisions 4. VCR Power supplies 5. Other power circuits NTPAD : 16.0 max. NTPAA : 12.0 max. 5.5 max. 5.0 max. Coating Extension on Lead : to line A A 3.51.0 10.0 max. o0.80.05 Sn plated Cu wire NTPAD/NTPAA Series 7.51.5 (in mm) NTPA9 : 11.0 max. NTPA7 : 9.0 max. 5.0 max. Coating Extension on Lead : to line A A 3.51.0 6.0 max. o0.60.05 Sn plated Cu wire NTPA7/NTPA9 Series 5.01.5 (in mm) Part Number NTPAN3R0LDKB0 NTPAN4R0LDKB0 NTPAN6R0LDKB0 NTPAJ4R0LDKB0 NTPAJ6R0LDKB0 NTPAJ8R0LDKB0 NTPAJ100LDKB0 NTPAD3R9LDNB0 NTPAD5R1LDNB0 NTPAD8R0LDNB0 NTPAD160LDNB0 NTPAA2R2LDNB0 Resistance (25C) (ohm) 3.0 15% 4.0 15% 6.0 15% 4.0 15% 6.0 15% 8.0 15% 10.0 15% 3.9 15% 5.1 15% 8.0 15% 16.0 15% 2.2 15% Permissible Max. Current (25C) (A) 5.4 4.7 3.9 4.0 3.4 3.0 2.6 3.3 3.0 2.7 2.0 3.7 Permissible Max. Current (55C) (A) 4.7 4.1 3.4 3.5 2.9 2.6 2.2 2.9 2.6 2.3 1.7 3.2 Thermal Time Constant (25C) (s) 135 130 130 125 125 130 130 65 85 65 100 70 Thermal Dissipation Constant (25C) (mW/C) 26.8 26.8 26.8 21.8 21.8 21.8 21.8 18.2 18.8 18.7 19.1 13.5 8 Continued on the following page. 35 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Continued from the preceding page. Part Number NTPAA3R9LDNB0 NTPAA5R1LDNB0 NTPAA8R2LDNB0 NTPAA100LDNB0 NTPA9160LBMB0 NTPA74R0LBMB0 NTPA75R0LBMB0 NTPA78R0LBMB0 NTPA7100LBMB0 NTPA7160LBMB0 NTPA7220LBMB0 Resistance (25C) (ohm) 3.9 15% 5.1 15% 8.2 15% 10.0 15% 16.0 15% 4.0 15% 5.0 15% 8.0 15% 10.0 15% 16.0 15% 22.0 15% Permissible Max. Current (25C) (A) 2.7 2.5 2.0 1.7 1.4 2.3 1.9 1.7 1.4 1.2 1.0 Permissible Max. Current (55C) (A) 2.3 2.2 1.7 1.5 1.2 2.0 1.6 1.5 1.2 1.0 0.88 Thermal Time Constant (25C) (s) 70 70 70 70 65 40 40 40 40 40 40 Thermal Dissipation Constant (25C) (mW/C) 13.5 13.5 13.5 13.5 11.6 9.4 9.4 9.5 9.5 9.9 9.1 NTPAD/NTPAA/NTPA9/NTPA7 series are also availabe on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0". Operating Temperature Range: -20C to +160C s Permissible Electrolytic Capacitor Voltage (AC) Part Number NTPAN NTPAJ NTPAD NTPAA NTPA9 NTPA74R0 NTPA75R0 NTPA78R0 NTPA7100 NTPA7160 NTPA7220 100Vrms 8600F 5000F 2700F 1400F 800F 700F 570F 400F 120Vrms 5972F 3472F 1875F 972F 556F 486F 396F 278F 132Vrms 4936F 2870F 1550F 803F 459F 402F 327F 230F 220Vrms 1777F 1033F 558F 289F 165F 145F 118F 83F 240Vrms 1493F 868F 469F 243F 139F 122F 99F 69F 264Vrms 1234F 717F 387F 201F 115F 100F 82F 57F s Application Circuit s Determination of Allowable Current 1.0 NTC -t + - Max. Current Ratio 0.5 8 0 20 40 60 80 100 Ambient Temperature (C) 120 140 160 36 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) s NTPAN3R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) s NTPAN4R0L Type Ta=25C 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPAN6R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAJ4R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPAJ6R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAJ8R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 Thermistor's Temperature (C) Thermistor's Temperature (C) Thermistor's Temperature (C) 8 Continued on the following page. 37 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. s NTPAJ100L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAD3R9L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPAD5R1L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAD8R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPAD160L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAA2R2L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 8 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 Continued on the following page. 38 Thermistor's Temperature (C) Thermistor's Temperature (C) Thermistor's Temperature (C) !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. s NTPAA3R9L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAA5R1L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPAA8R2L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPAA100L Type 10 Ta=25C Resistance Ratio Thermistor's Temperature 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 0.1 Current (A) 1 1 10 0.01 0.01 1 0.1 Current (A) 1 10 s NTPA9160L Type s NTPA74R0L Type Ta=25C 10 Ta=25C Resistance Ratio Thermistor's Temperature 1000 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 1 0.1 Current (A) 1 10 0.01 0.01 0.1 Current (A) 1 1 10 Thermistor's Temperature (C) Resistance Ratio (Rt/R25) Thermistor's temperature (C) Resistance Ratio (Rt/R25) Thermistor's Temperature (C) 8 Continued on the following page. 39 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. s NTPA75R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPA78R0L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 1 0.1 Current (A) 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPA7100L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 s NTPA7160L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) 1 100 1 100 0.1 10 0.1 10 0.01 0.01 1 0.1 Current (A) 1 10 0.01 0.01 0.1 Current (A) 1 1 10 s NTPA7220L Type Ta=25C 10 Resistance Ratio Thermistor's Temperature (C) Resistance Ratio (Rt/R25) 1000 1 100 0.1 10 8 0.01 0.01 0.1 Current (A) 1 1 10 40 Thermistor's Temperature (C) Thermistor's Temperature (C) Thermistor's Temperature (C) !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Inrush Current Suppression Lead Type !Caution/Notice s !Caution (Storage and Operating Conditions) 1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire. 2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case. 3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case. 4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics causing failure and burn-out. (1) Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist. s !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. s Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. s Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. 8 s Notice (Soldering and Mounting) 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire. 41 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Inrush Current Suppression Lead Type !Caution/Notice s Notice (Handling) 1. When this product is operated, temperature of some areas may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for a long time, they may be deteriorated or may produce harmful gas; such harmful gas may deteriorate the element of this product. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. Therefore, do not immerse it in water or any solvent. 3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or give a shock at handling. Such forces may cause cracking or chipping to the element. 4. Do not apply excessive force to the lead wire. Otherwise, it may cause the junction between lead and element to break or crack. So, fix lead wire of element side when lead wire is bent or cut. s Notice (Others) 1. This product may allow passing higher current than its initial value when it receives inrush current again shortly after the previous one after it cools down and sufficiently recovers its original resistance. Be sure the highest current under actual condition remains within the operating repetition and the operating temperature. 2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts. 8 42 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Inrush Current Suppression Lead Type Package s Minimum Order Quantity Bulk Part Number NTPAN_DKB0 NTPAJ_DKB0 NTPAD_DNB0 NTPAA_DNB0 NTPA9_BMB0 NTPA7_BMB0 Minimum Quantity (pcs.) 50 100 150 300 300 500 NTPAD_D6A0 NTPAA_D6A0 NTPA9_B1A0 NTPA7_B1A0 Ammo Pack Taping Part Number Minimum Quantity (pcs.) 400 750 1,000 1,000 s Taping Dimensions (NTPAD/NTPAA_D6A0 Series) P2 D P S h1 h2 T A P1 L F d W2 H0 W0 W1 l P0 t2 H2 e Item Pitch of Component Pitch of Sprocket Hole Lead Spacing Length from Hole Center to Component Center Length from Hole Center to Lead Body Diameter Body Thickness Deviation Along Tape, Left or Right Carrier Tape Width Position of Sprocket Hole Lead Distance between Reference and Bottom Plane Height of Component Protrusion Length Diameter of Sprocket Hole Lead Diameter Total Tape Thickness Total Thickness, Tape and Lead Wire Deviation Across Tape Portion to Cut in Case of Defect Hold down Tape Width Hold down Tape Position Coating Extension on Lead Type NTPAD NTPAA D (mm) 16.0 max. 12.0 max. T (mm) 5.5 max. 5.0 max. Code P P0 F P2 P1 D T S W W1 H0 H2 I D0 d t1 t2 h1, h2 L W0 W2 e t1 W oD 0 Dimensions (mm) 30.0 15.00.3 7.50.5 7.51.5 3.751.0 (refer to the table below) (refer to the table below) 2.0 18.00.5 9.00.5 16.00.5 10.0 max. W0.5 to Y6.0 4.00.1 0.80.05 0.60.3 2.0 max. 2.0 max. 11.0+0 -2.0 11.5 min. 4.0 max. to line A 8 Continued on the following page. 43 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 Inrush Current Suppression Lead Type Package Continued from the preceding page. s Taping Dimensions (NTPA9/NTPA7_B1A0 Series) P2 D P S h1 h2 T A P1 L F d W2 H0 W0 W1 l P0 t2 W oD 0 H2 e Item Pitch of Component Pitch of Sprocket Hole Lead Spacing Length from Hole Center to Component Center Length from Hole Center to Lead Body Diameter Body Thickness Deviation Along Tape, Left or Right Carrier Tape Width Position of Sprocket Hole Lead Distance between Reference and Bottom Planes Height of Component Protrusion Length Diameter of Sprocket Hole Lead Diameter Total Tape Thickness Total Thickness, Tape and Lead Wire Deviation Across Tape Portion to Cut in Case of Defect Hold down Tape Width Hold down Tape Position Coating Extension on Lead Code P P0 F P2 P1 D T S W W1 H0 H2 I D0 d t1 t2 h1, h2 L W0 W2 e t1 Dimensions (mm) 12.7 12.70.3 5.0+0.8 -0.3 6.351.3 3.850.8 (refer to the table below) 5.0 max. 1.5 18.00.5 9.0+0.5 -0.75 16.01.0 6.0 max. W0.5 to Y4.0 4.00.3 0.60.05 0.60.3 2.0 max. 1.5 max. 11.0+0 -2.0 11.0 min. 4.0 max. to line A Type NTPA9 NTPA7 D (mm) 11.0 max. 9.0 max. 8 44 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf 11.2.21 |
Price & Availability of NCP18XH103J0SRB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |